Being a programmer or software developer requires you to sit in Infront of a computer for long periods of time. Since you’ll be looking into the screen most of the time, having a decent monitor is absolutely essential.
It eliminates unnecessary headaches, eye-strain, etc, and helps you work comfortably for long hours. Having a high-resolution monitor helps you run many applications without you having to worry about the screen real estate. You also don’t have to worry about replacing them more often so they will improve your overall productivity and thus boost your output in the long run.
There are a plethora of monitors in the market to choose from. So, it might be a little bit confusing. This article will help you choose the best monitor for programming.
After reading this article, you’ll know what to look for in a monitor used for programming and you’ll have a list of the best monitors to choose from.
Here are our Top Four Picks of the Best Monitors for Programming and Coding
Here is our complete list of the Best Monitors for Programming and Coding
Dell UltraSharp U2415 - Best Monitor for Programming and Coding
- Best for Programming
- Many connectivity ports
- Ergonomic stand
- Great viewing angles
- No built-in Speakers
The Dell UltraSharp U2415 comes with a 24-inch, 1920 x 1200 display that has an aspect ratio of 16:10. The monitor can support Full HD content. Its resolution will help you stuff more applications onto the screen because of increased screen real estate.
Since the monitor uses an IPS panel, the color quality is very good. It has decent levels of brightness and contrast. Watching movies will be a feast for the eyes. It has a pixel density of 94 PPI which makes reading text comfortable and images appear sharp. There won’t be any backlight flickering hence no straining of eyes. The monitor uses an anti-glare screen so you can also use it in bright areas without any distracting reflections.
The overall build quality is strong and the monitor looks professional. The stand deserves a special mention. You can tilt, swivel, and adjust the height of the monitor with it. You can also pivot the monitor at 90 degrees.
The viewing angles are very comfortable. The monitor is also VESA compatible, so you can wall mount your monitor. The bezels are also thin allowing you to set up a multi-monitor setup side by side without any distractions.
The Dell UltraSharp U2415 has a refresh rate of 60Hz which is the standard for monitors today. It has a 6ms (GtG) response time which is decent. You can also use it for casual gaming.
It has 2x HDMI, 1x DisplayPort, 1x Mini DisplayPort. It also has a DisplayPort for outputting a single to another monitor. There is also a USB hub containing four USB 3.0 ports. It doesn’t have in-built speakers which won’t be a deal-breaker for most users.
Samsung C32F391 - Best Curved Monitor for Programming
- Curved display
- 32 inches screen size
- Aesthetically pleasing
- Not the best image quality
- Screen Glare
The Samsung C32F391 is a Full HD 32-inch monitor that uses a VA panel. The image quality is one of the best you can see in VA panels. The contrast ratios are the best you can find in any other panel. It is in no way comparable to IPS displays when it comes to picture quality. You may find the image washed-out if you switch from a high-end IPS display. The screen is glossy so there will be reflections and glare, unlike the anti-glare displays.
The design is aesthetically pleasing and one of the first things that will attract people to this monitor. It is completely white in color with very thin bezels that make the monitor look premium. The stand is sturdy with a large circular base.
There is not much you can do when it comes to maneuvering. The stand can only be tilted forwards or backward. You cannot swivel and pivot it the way you like. The viewing angles are a bit restrictive when it comes to VA panels. You can mount the monitor to a wall using a VESA bracket.
The Samsung C32F391 has a refresh rate of 60Hz and a response time of 4ms. It is a good choice if you’re also a casual gamer. It also has the AMD FreeSync variable refresh rate technology. So, if you have an AMD graphics card, get ready for a smooth, tear-free gaming experience.
Its display options include 1x VGA, 1x HDMI, and 1x DisplayPort. There is also a 3.5mm jack for the headphones or external speakers. It also has built-in speakers. The speakers are just average. I would recommend you invest in a good sound system rather than relying on these speakers.
Dell Ultrasharp U3818DW - Best Ultrawide Monitor for Programming
- Best Ultrawide monitor
- Good pixel density
- Good build quality
- Curved screen
- Not for Gaming
The Dell Ultrasharp U3818DW is a curved 38-inch ultrawide monitor having a resolution of 3840 x 1600. It has an aspect ratio of 21:09 and uses an IPS panel. The IPS panels are known for their vivid color and amazing screen clarity. It also has a pixel density of 111 PPI so the text appears sharp and you won’t be having any problems with readability.
The design is professional and the build quality is premium. The stand is sturdy and you can adjust the height, tilt the monitor, and swivel it effortlessly. The viewing angles re also comfortable. You can also wall-mount the monitor using the VESA mount. The screen is also anti-glare which eliminates any reflections and it is also hardened with 3H Hard Coating.
The Dell Ultrasharp U3818DW has a refresh rate of 60Hz and a response time of 5ms. You won’t have any problems if you’re a casual gamer but keep in mind this is in no way a gaming monitor and you’ll be disappointed if you bought it for gaming. It also has no FreeSync or G-Sync technology.
The display ports include: 1 x DisplayPort, 2 x HDMI 2.0. You also get plenty of USB ports on all sides. It also has a USB Type-C port. It has in-built speakers which should be sufficient most of the time unless you’re having guests to watch movies for which you’ll need external speakers.
Know that this monitor is not for everyone and is aimed at a specific audience like graphics designers, software developers, etc. You can use it for watching movies and working productively for long hours. It is a bit expensive but definitely worth the money.
LG 27UK650 - Best 4K monitor for Programming
- 4K resolution
- HDR supported
- Superb image quality
- Superb all-round performance
- Cannot swivel the monitor
The LG 27UK650 is a 27-inch 4K IPS monitor with HDR. The picture quality is absolutely amazing. The pictures are vivid and come to life when you turn on the HDR. The 27-inch screen has plenty of real estates to accommodate multiple applications running simultaneously. It has a PPI of 163 which will make images crisper and sharper. I recommend connecting a console to experience the full power of HDR.
The build quality feels premium. The stand is sturdy. You can tilt, adjust the height, and pivot it at 90 degrees. You cannot swivel the screen to right or left. You can also wall-mount the monitor using the VESA mount.
The LG 27UK650 has a refresh rate of 60Hz and a response time of 5ms (GtG) and an input lag of 9ms. It is a great option for gaming if you have a powerful graphics card. It also has FreeSync variable refresh rate technology to minimize stutter and screen-tearing.
The connectivity options include 2x HDMI 2.0 ports, 1x DisplayPort 1.2, and a headphones jack. FreeSync and HDR options are supported over both HDMI and DisplayPort. It has no built-in speakers.
Overall the LG 27UK650 is a great 4K monitor for software developers. It offers many additional features and comes at a reasonable price. It will definitely not disappoint you.
ASUS PB287Q - Runner-up 4K Monitor for Programming
- Reasonable price
- 4K Resolution
- Solid Performance in Gaming
- Mediocre viewing angles
The ASUS PB287Q is a 28-inch 4K monitor that uses a TN panel. The image quality is decent for a TN panel but not on par with those of IPS displays. Overall, you won’t be having any issues with this monitor’s image quality.
The overall design is also professional. The build quality is also strong. The bezels are also not too wide so you can run a multi-monitor setup without many distractions. The stand is also sturdy and you can tilt, swivel, pivot, and adjust the height of the monitor effortlessly. You can also wall-mount it using a VESA mount.
The viewing angles are not as good as those you see on an IPS display. Every TN panel monitor has mediocre viewing angles. This monitor is no different. The vertical viewing angle is poor but the horizontal viewing angle is fair.
Gaming is an aspect in which this monitor shines brightly. The TN panel offers super-fast 1ms response times and very less input lag. The display is also flicker-free meaning you won’t have any screen flickering while gaming. You can run games at 4K 60Hz effortlessly provided you have a powerful graphics card.
Its connectivity ports include 1x HDMI 1.4/MHL port, 1x HDMI Port, 1x DisplayPort 1.2, 1x Earphone Jack, 1x Audio In port. It also comes with built-in speakers which are average.
The ASUS PB287Q is one of the affordable 4K displays in the market. It has a decent color quality as well. If you’re mainly using your monitor for programming and software development. This monitor should be more than enough.
ViewSonic VG2765 - Best 1440p Monitor for Programming
- Great image quality
- Flexible Stand
- Good viewing angles
- Value for money
The ViewSonic VG2765 is a 1440p 27-inch monitor using an IPS panel. Its color quality is top-notch. The images are vivid with a good balance of contrast and brightness. Playing games and watching movies will be a pleasant experience.
The overall design and build quality are decent. The stand is also sturdy. You will be able to adjust the height, swivel the monitor, and tilt it the way you want. You can also pivot it at 90 degrees. The monitor is VESA compatible so you can wall-mount it. There are no issues with viewing angles and you will be able to work comfortably for long hours.
The bezels are very thin so you can use a multi-monitor setup without many distractions. The screen is also anti-glare so no more reflections. It is also hardened using Hard coating (3H).
The ViewSonic VG2765 is a 60Hz monitor with a response time of 5ms. You will have no issues with some casual gaming. It also has no adaptable refresh rate technology.
You have plenty of connectivity options. They include: 1x Mini DisplayPort, 1x HDMI, 1x DisplayPort, 1x Audio line-out (mini-jack). You also get a USB hub containing three USB 3.0 slots. There is also a 2-watt inbuilt speaker which is OK.
This monitor is a great choice for programmers and software developers. It has a good balance of the right features, the right specs, and comes at a reasonable price. Overall, it is one of the better valued 1440p monitors in the market. You will definitely appreciate its performance.
HP VH240a - Best Budget Monitor for Programming
- Fully Adjustable stand
- Good image quality
- No DisplayPort
- Average speakers
The HP VH240a is a 23.8-inch 1080p IPS monitor. It has an aspect ratio of 16:9. The IPS displays are known for their rich visuals full of detail. This monitor is no exception. The brightness and contrast levels are well balanced. The screen is anti-glare so no reflections. It has a pixel density of 92 PPI.
The build quality is decent and the bezels are thin. So this is a great choice if you’re thinking of running a multi-monitor setup.
It comes with a fully adjustable stand. You can increase the height, tilt, swivel, and also pivot the monitor at 90 degrees. You won’t be having any issues with viewing angles and will be able to work comfortably for long hours. You can also wall-mount it since it is VESA compatible.
It has a refresh rate of 60Hz and a response time of 5ms. You won’t have any problems if you’re a casual gamer.
The connectivity options include 1x HDMI 1.4 port and 1x VGA. There is no USB hub present. It comes with in-built speakers. I would suggest you not to rely on those.
The HP VH240a is an all-rounder and you will definitely appreciate it if you’re mainly using it for Programming and casual gaming. It also comes at an affordable price so you should consider buying it.
How to Pick the Right Monitor for Programming
Screen Size: The screen size is entirely your own preference. I recommend a minimum size of 21-inches. You can go for a 24-inch monitor if you also play games or a 27-inch monitor is you want to watch movies. It is very common to see people thinking they will get extra space if the have more screen size. The extra screen real estate depends on the resolution of your monitor, not screen size.
Resolution: The resolution is the total number of pixels that can be displayed on your monitor’s screen. Having a greater number of pixels means you will be able to have more screen real estate which means you will be able to fit more stuff on your monitor. The 1080p resolution is the most commonly seen among monitors.
There are also 1440p and 4K resolutions. 4K resolution will be the most expensive. I suggest you stick with either a 1080p resolution or a 1440p resolution. They will be enough to fit most of your applications without any issues.
Pixel per inch (PPI): The PPI of a monitor depends on both the size of the monitor and its resolution. In general, the higher the PPI of your monitor, the higher will be the sharpness of the image. A decent PPI will let you see objects or images and read the text without straining your eyes. 90 PPI is a good standard and anything above makes the pictures and text more vivid. You can calculate the PPI here.
Panel: Almost all the latest monitors in the market today use one of the IPS, TN, and VA panels.
The IPS panels have better color accuracy and superb image quality. The viewing angles are also the best out of the three. There will be issues of IPS glow that would be present at the corners wherein you’ll see the screen having more brightness towards the edges. This is something common in all the IPS displays and can’t be eliminated. This won’t be a problem for you as a developer.
The TN panels are most popular among gamers. This is because the have the best refresh rates and response times which is a very important factor if you’re a hardcore competitive gamer. The TN panels have an average color quality when compared to IPS displays. Some of them may even appear “washed out” because of the bad viewing angles.
The VA panels can be placed in between IPS and TN panels. You can purchase one if you use it exclusively for Programming.
If you use your monitor for coding and also watch movies on it frequently, purchase an IPS display. If you use your monitor for gaming and programming, purchase a TN panel. Purchase a VA panel monitor if you can grab it for a great deal.
Refresh rate: It is the number of times a monitor updates itself with new images. Unless you’re a gamer, you shouldn’t be concerned with your monitor’s refresh rate. Most monitors have a refresh rate of 60Hz which will be more than enough for watching movies. The refresh rate does not affect programming.
If you’re an esports gamer 144Hz would be an optimal choice. There are few IPS monitors and many TN monitors available at affordable prices. This is something entirely up to you to decide.
Input lag: It is the time difference between the input you give and its response you see on the monitor. Once again, this is important only if you’re a gamer. It has no effect on programming. It may distract you if it is greater than 40ms but most monitors have an input lag of 15ms or less so you don’t have to worry about it. In general, the lower the input lag, the better will be your gaming experience.
Stand: You will need to adjust your orientation every now and then. Your stand will help you do that. Sometimes you’ll face problems using a multi-monitor setup if your stand doesn’t tilt properly. This is why you need to see if the stand of the monitor you purchase will be able to tilt, swivel, or even pivot the screen. Some monitors also support VESA compatible mount using which you can use custom stands for your monitor.